Setting Up The Hp Netserver E 60; Setup Steps; Preparations - HP NetServer E 60 Installation Manual

1 Setting Up the HP NetServer E 60

Setup Steps

It is important that you follow the setup steps in the exact order shown below.
Skip any steps that do not apply to you. To provide further details, these steps
include references to other sections of this manual and to other documents.

Preparations

CAUTION
The HP NetServer E 60 weighs approximately 31 pounds,
excluding a keyboard or monitor. Use appropriate lifting
precautions when you move it.
Verify Contents
Save Packaging
Find System
Configuration CD
Unpack the contents of the shipping box.
Verify the contents of the shipping box against the
Contents list included with your HP NetServer E 60. If
anything is missing or damaged, call your reseller.
Store the empty boxes and packing material in a safe
place. This is especially important if you plan to ship
the HP NetServer E 60 elsewhere for final installation.
HP NetServer Navigator CD-ROM
This CD-ROM is used to configure and troubleshoot the
HP NetServer E 60. It is shipped with each E 60.
1