Configuring The System - HP NetServer E 60 Installation Manual

Chapter 1

Configuring the System

1) Connect
Peripherals
2) Boot the HP
NetServer Navigator
CD-ROM
3) Read the System
Readme File
4) Run Configuration/
Installation
Assistant
5) Choose a NOS
Setting Up the HP NetServer E 60
For details on rear panel interface connectors, see
Chapter 2.
For details on connecting the keyboard, mouse,
monitor, and UPS, see Chapter 8.
Turn on the monitor. Press the power-on button on
the HP NetServer, and press the eject button on the
CD-ROM drive.
Place the HP NetServer Navigator CD-ROM in the
drive, and close the drive. Press the Reset button. If
the system fails to restart, follow the instructions on
the screen.
When the HP Navigator starts, you can set the time
and date, and change the display language.
For details, see Chapter 9, "Configuring the Server
Using the HP NetServer Navigator CD-ROM."
Select View Readme from the HP Navigator main
menu. The Readme file contains the latest
information to help you install your HP NetServer.
If you want to change the language, select Set
Preferences from the HP Navigator main menu and
choose a language. From the Navigator main menu,
select Configuration and Installation Assistant.
Select Express from the next screen to begin the
Express mode of configuration.
Select the Network Operating System (NOS) you
will install from the choices displayed.
5