Complete Display; Warnings Display - norbar NorTronic ASCII Operator's Manual

Complete Display (CD)
• Used to enable or disable the displaying of the Complete screen on the tool when using a Target with
the # of readings set > 1 and saving the results to the tool.
Command
SC:CD:0
SC:CD:1
Response
OK:0
OK:1
Example
Warnings Display (WD)
•
Used to enable or disable the displaying of the Warnings screens on the Tool when either (or both) the
Multiplier Ratio or Torque CRS settings have been changed from default.
Command
SC:WD:0
SC:WD:1
Response
OK:0
OK:1
Example
(Set Display Complete OFF)
(Set Display Complete ON)
(OFF)
(ON)
(Set Display Warnings OFF)
(Set Display Warnings ON)
(OFF)
(ON)
31