Camera Settings - Yealink VP59 Teams Edition User Manual

Camera Settings

You can make basic PTZ control for your UVC30 camera, adjust camera settings, or enable the auto-
framing feature.
• Controlling UVC30 Camera Position
• Resetting the Position for UVC30 Camera
• Configuring the Exposure Settings
• Configuring the White Balance Setting
• Adjusting Display Image of the Camera
• Enabling Auto-framing for UVC30 Camera
• Adjusting Hangup Mode and Camera Pan Direction
• Resetting the Camera
Controlling UVC30 Camera Position
Procedure
Go to > Settings > Device Settings > Control.
Resetting the Position for UVC30 Camera
If you have adjusted the camera angle or local length, you can reset it to the original position.
Procedure
1. Go to
> Settings > Device Settings > Control.
2. Select Reset.
Related tasks
Controlling UVC30 Camera Position
Configuring the Exposure Settings
Procedure
1. Go to
> Settings > Device Settings > Exposure Settings.
2. Select the desired mode from the Exposure Mode field.
If you select Auto Exposure:
•
Select the desired value from the Exposure Compensation, Flicker, Gain Limit, Wide Dynamic
Range, Metering field respectively.
If you select Manual Exposure:
•
Select the desired value from the Gain Limit, Wide Dynamic Range, Shutter field respectively.
If you select Shutter Priority:
•
Select the desired value from the Exposure Compensation, Gain Limit, Wide Dynamic Range,
Metering, Shutter field respectively.
• If you select Brightness Priority:
Select the desired value from the Flicker, Wide Dynamic Range, Metering, Brightness field
respectively.
| Optional Accessories with Your Phone | 60