Bluetooth Wireless Microphone Cpw90-Bt-Single; Led Indicator Instructions - Yealink VP59 Teams Edition User Manual

Resetting the Camera
You can reset the camera to factory defaults.
Procedure
1. Go to
> Settings > Device Settings > Others.
2. Reset Camera.
3. OK to reset the camera.

Bluetooth Wireless Microphone CPW90-BT-Single

You can pair the CPW90-BT-Single with the phone and then use it as the phone's microphone.
Note: You cannot use the CPW90-BT-Single device and Bluetooth feature at the same time. You
can only activate either Mic-BT mode or Bluetooth mode.
•

LED Indicator Instructions

• Activating the Mic-BT Mode
• Pairing Mic with the Phone
• Viewing the Details of the Paired Mic
• Unbinding the Paired Mic
• Deactivating the Mic-BT Mode
Related information
Bluetooth
LED Indicator Instructions
There are two indicators on the CPW90-BT-Single: mute LED indicator and battery LED indicator. The
indicators display the CPW90-BT-Single work status.
Mute LED indicators:
Mute LED Status
Fast flashing yellow
Slowly flashing yellow
Off
Slowly flashing red
Solid red
Solid green
Battery LED indicators:
Battery LED Status
Solid green for one second and
then off
Solid green for 3 seconds and
then off
Solid green
Description
The CPW90 is in the registration mode.
The CPW90 has registered with the phone, but the CPW90 is out of
range.
The phone is idle.
The phone is receiving an incoming call.
The phone is muted.
The phone is in a call and unmuted.
Description
The CPW90 is turned on.
The phone is idle.
The CPW90 is fully charged.
| Optional Accessories with Your Phone | 62