Yealink VP59 Teams Edition User Manual page 61

Configuring the White Balance Setting
Procedure
1. Go to
> Settings > Device Settings > White Balance Setting.
2. Select the desired value from the White Balance Mode field and OK.
• Auto, it calculates the best white balance setting based on lighting conditions in the room.
• Indoor
Outdoor
•
One push
•
• ATW, it automatically adjusts the white balance according to the picture taken by the camera.
• Manual Setting, you can manually adjust the color temperature in the Temperature field.
Adjusting Display Image of the Camera
Procedure
1. Go to
> Settings > Device Settings > Graphics.
2. Select the desired mode from the Display Mode field.
High Definition
•
Standard
•
• Mild
• Custom, you can adjust the Saturation, Sharpness, Brightness, and Contrast respectively, and
select the desired mode from the Noise Reduction(2D) field.
Enabling Auto-framing for UVC30 Camera
Auto-framing is mainly based on face detection, which provides real-time detection and position tracking on
all faces in the conference room. All participants in the output screen are covered and the camera can be
automatically adjusted according to the number of participants and the position changes.
About this task
When the auto-framing feature is enabled, you cannot control the UVC30 camera position.
Procedure
1. Go to
> Settings > Device Settings > Others.
2. Auto Framing.
Adjusting Hangup Mode and Camera Pan Direction
Procedure
1. Go to
> Settings > Device Settings > Others.
2. Turn on Hangup Mode.
The picture took by the camera is upside down. This mode is applicable when you install the camera
upside down.
3. Select the desired value from the Camera Pan Direction field.
If you select Reversed, the camera pan direction will be reversed when pressing the left and right
navigation keys on the remote control.
| Optional Accessories with Your Phone | 61