Table of Contents
Advertisement
HIGHLANDER II: SECTION 6
TROUBLESHOOTING
The control board has 32 LEDs to provide the status of power to the board and each circuit that is monitored. It
shows the location and description of each LED. See Figure 6-4.
4X Bi-Color
Indicator LEDs
26X Green Circuit
Status LEDs
DESCRIPTION
4X Indicators
3.3V Power
24V Power
E-Stop
HIGHLANDER II VERTICAL PLATFORM LIFTS:
30
17FEB2021 | 630-00113 REV C
COLORS
STATUS, TROUBLESHOOTING
Green,
These LEDs exactly duplicate the Indicator LEDs on Top Cap. If they do
Amber,
not match there could be an issue with cable or Indicator Board. Refer
Red
to Troubleshooting codes above.
Green
LED ON indicates processor is getting power.
Green
LED ON indicates all 24V circuits are getting power.
Green
LED ON indicates the E-stop is not depressed (lift can run)
3.3V Power LEDs
Figure 6-4
Install Manual
24V Power LEDs
Hide quick links:
Advertisement
Table of Contents
