Torque Recommendations - Yetter V.T.A. 2982-001 Set-Up And Parts Manual

READ THESE INSTRUCTIONS FIRST:
1. Improperly tightened bolts will result in damage, breakage, expense, and down time.
2. Always replace bolts with the specified grade and type.
3. Torque properly before first use of the machine and every 2-4 hours of use until you are sure bolts
are staying tight.
4. The chart below is a guide for proper torque. Use it unless a specified torque is called out
elsewhere in the manual.
5. Torque is the force you apply to the wrench handle or the cheater bar, times the length of the
handle or bar.
6. Use a torque wrench whenever possible.
The following table shows torque in ft. lbs.
Lubricate all bearings and moving parts as assembled and make certain that they work freely.
WARNING:
without using safety lockups.
CAUTION:
blades.
Extra attention should be paid to lifting techniques while handling and or
maneuvering the units during assembly. Failure to do so may lead to personal injury.
Use heavy gloves while handling the blades during assembly and any time
adjustments or maintenance operations are made to the units.
4
BOLT TORQUE
Never work around the toolbar / implement while in a raised position
2982 V.T.A. ™ Vertical Tillage Attachment unit has sharp
The