Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Yetter V.T.A. 2982-001
Summary of Contents for Yetter V.T.A. 2982-001
- Page 1 2982-001 V.T.A.™ VERTICAL TILLAGE ATTACHMENT SET-UP AND PARTS MANUAL 2565-732_REV_C 12/2019 YETTER MANUFACTURING CO. FOUNDED 1930 Colchester, IL 62326-0358 Toll free: 800/447-5777 309/776-3222 (Fax) Website: www.yetterco.com E-mail: info@yetterco.com...
-
Page 2: Forward
WARRANTY Yetter Manufacturing warrants all products manufactured and sold by it against defects in material. This warranty being expressly limited to replacement at the factory of such parts or products as shall appear to be defective after inspection. -
Page 3: Table Of Contents
SAFETY PRECAUTIONS You can make your farm a safer place to live and work if you observe the safety precautions given. Study these precautions carefully and insist those working with you and for you follow the precautions. Finally, remember this an accident is usually caused by someone’s carelessness, neglect or oversight. WARNING Never park the equipment on a steep incline or leave the equipment running unattended. -
Page 4: Torque Recommendations
BOLT TORQUE READ THESE INSTRUCTIONS FIRST: 1. Improperly tightened bolts will result in damage, breakage, expense, and down time. 2. Always replace bolts with the specified grade and type. 3. Torque properly before first use of the machine and every 2-4 hours of use until you are sure bolts are staying tight. -
Page 5: Machine Application Guide
Tillage Attachment can be used as a surface crust breaker following heavy rains. Like all Yetter products, it is built tough to last, and even in high residue crops, such as wheat, corn, and soybeans, the Vertical Tillage Attachment delivers optimal performance, cutting heavy residue to enhance planter operation. -
Page 6: Installation Instruction
INSTALLATION INSTRUCTIONS STEP 1. Install the hub/bracket assembly to the shank using the 2) 7/16” x 2-1/4” or ½” x 2-1/2” Plow bolts and 7/16” or ½” flange lock hex nuts. STEP 2. Torque the bolts so that the mount plate will conform to curvature of the shank. - Page 7 INSTALLATION INSTRUCTIONS STEP 3. Attach the coulter blades and 2987-301 hubcap retainer to the hub/bracket assembly using the 8) ½” x 1-1/4” carriage bolts, lock washers and hex buts.
-
Page 8: Operation
OPERATION The V.T.A.™ should be operated 6-10 mph. Level the toolbar frame so that the coulter blades are the same depth front to back and side to side. Operate the coulter blades at 3” +/-1” in the soil. If needed, add ballast or weight to maintain coulter blade depth. 1. -
Page 9: Maintenance
MAINTENANCE LUBRICATION: USE #2 MULTI-PURPOSE LITHIUM GREASE To ensure longevity and reliability of the V.T.A. Coulter, the recommended lubrication schedule should be followed using multi-purpose grease at hourly intervals as indicated. BEARING ADJUSTMENT: 1. Raise the toolbar until the blade is clear of the ground. Place a safety stand under the toolbar. Remove the hubcap, cotter pin, slotted nut and washer from the hub assembly. -
Page 10: Parts Identification
PARTS IDENTIFICATION... - Page 11 PARTS IDENTIFICATION...
- Page 12 East, the South, the West and now north into Canada. We’re even getting orders from as far away as Australia and Africa. So, when you buy Yetter products . . .you’re buying a name that’s recognized. A name that’s known and respected. A name that’s become a part of American agriculture and has become synonymous with quality and satisfaction in the field of conservation tillage.