Verifying Signal Status; Verifying Input Status - AMX CP-20A Instruction Manual

Verifying Signal Status

Verifying Signal Status
Signal status can be verified to confirm that a switch has executed properly or to confirm correct routing
to multiple outputs. Input status and output status both function on the CP-20A Control Panel. An output
can only be connected to one input; therefore, verifying the status of an output will display only the one
input it is currently connected to.
You can return to the Main Menu screen at any time by pressing the Function key.
If you need to change the virtual matrix, see "Changing the Virtual Matrix" on page 8.

Verifying Input Status

The example below verifies the signal status for Input 31: Main Mic Mtg Rm B on Virtual Matrix 0.
Note: If you choose to check the status of an input, all the outputs that are connected to it
will be listed.
To verify the signal status of an input:
1. At the Main Menu screen, choose the Status command.
If the Status command is not available, press the Function key to view additional
Main Menu options.
The Status Input screen appears, displaying the available inputs.
14 CP-20A Instruction Manual