Table of Contents
Advertisement
Introduction
Keys & Functions
FIG. 2
Close-up view of a CP-20A Control Panel
Graphic LCD
An LCD with a backlight displays instructions and selection entry fields. The backlight automatically
turns off after 15 minutes of inactivity. Press any key to reactivate the light.
Note: To adjust the contrast of the LCD, see "Adjusting LCD Contrast" on page 27.
Dynamic Menu Area
The menu displays different command options across the bottom of the LCD, depending on which
screen is active. These options can be accessed using the corresponding dynamic menu keys. The menu
options are multilevel with the ability to display custom input (source) and output (destination) names
(labels). The default channel name (e.g., O_Ch:0003 for Output 3) appears unless the name has been
modified in the configuration file* using XNConnect (for more information, see the XNConnect
Help file).
* The configuration file (.xcl file) contains routing and control information for a system and is modified
with XNConnect, which graphically displays the file. Both the configuration file and XNConnect are on
the AMX AutoPatch CD.
2
Power Indicator LED
Graphic LCD
Dynamic Menu Area
CP-20A Instruction Manual
Advertisement
Table of Contents
