Table of Contents
Advertisement
2.
Locate Input 31: Main Mic Mtg Rm B by scrolling through the list using the arrow keys.
(Press and hold an arrow key to scroll quickly.)
3.
Press the Select key to enter the selection.
The Status Results screen appears listing the outputs,
13: Speaker Set 1 Rm A, 14: Speaker Set 2 Rm A, 19: Speaker Set 1 Rm B, and
20: Speaker Set 2 Rm B, that are connected to the input being verified.
Note: If the screen is full, more outputs than the ones displayed may be active. Use the arrow keys
to scroll to check for additional active outputs.
4.
Press the Back key to return to the Status Input screen to verify the status of additional signals.
Or
Press the Function key to return to the Main Menu screen.
CP-20A Instruction Manual
Verifying Signal Status
15
Advertisement
Table of Contents
