Executing Switches - Selecting Output First - AMX CP-20A Instruction Manual

Executing Switches
5.
Press the Select key.
Output 6: Reception Monitor is highlighted.
Note: You can select multiple outputs by scrolling through the list and pressing the Select key. The
Select key functions as a toggle switch, selecting and unselecting outputs in the list each time it is
pressed. Any outputs that are already routed to the selected input are highlighted. Unselecting an
output(s) results in its disconnection when the Take key is pressed.
6.
Press the Take key to execute the operation.
The switch from Input 33: Satellite Dish to Output 6: Reception Monitor occurs as soon
as the Take key is pressed.
The system returns to the Change Input screen.
7. Make additional switches.
Or
Press the Function key to return to the Main Menu screen.
Executing Switches – Selecting Output First
You can execute a switch by selecting one output first; however, to select multiple outputs you must use
the "Selecting Input First" method (see page 4).
The example below routes a signal to Output 15: Main Monitor Rm B from
Input 10: DVD #1 Control Rm on Virtual Matrix 0.
To execute a switch selecting output first:
1.
At the Main Menu screen, choose the Change command.
If the Change command is not available, press the Function key to view additional
Main Menu options. The Change Input screen appears.
6 CP-20A Instruction Manual