Table of Contents
Advertisement
Introduction
Applicability Notice
The information in this manual applies to the CP-20A Control Panel, which comes with many of the
Modula pre-configured systems or can be ordered as a remote control panel or as part of a Modula or
Optima custom system.
Pre-Configured Systems
The CP-20A can be part of a pre-configured system made up of a Modula 3 RU or 4 RU. All Modula
pre-configured systems are numbered FGP34-xxxx-xxx (e.g., FGP34-1644-616).
Remote Control Panel
The CP-20A Remote Control Panel (Sales # FG1090-258) can be ordered as a separate unit to control an
Optima, Modula, or 8Y-3000 system.
Custom Systems
The CP-20A can be ordered as an option for Optima 3 RU, Modula 3 RU and 4 RU, and 8Y-3000 custom
systems.
Enclosures
8Y-3000
Modula 3 RU
Modula 4 RU
Optima 3 RU
Overview
The CP-20A is used for controlling the system's switches and system attributes. Although control panels
are optional, we recommend one per system for system verification, redundant control, and
troubleshooting.
FIG. 1 illustrates an Optima Distribution Matrix with a CP-20A Control Panel. Other models may vary
slightly in appearance.
FIG. 1
CP-20A Control Panel on an Optima
Note: AMX AutoPatch enclosures can also be controlled using BCS (Basic Control Structure)
commands transmitted through an external controller; for more information, see the BCS
Protocol Instruction Manual on the AMX AutoPatch CD or at www.amx.com.
CP-20A Instruction Manual
Custom Systems
Control Panel Sales #
FG1043-216
FG1034-243
FG1034-246
FG1046-213
Introduction
1
Advertisement
Table of Contents
