Function Key - AMX CP-20A Instruction Manual

Dynamic Menu Keys

Function Key

FIG. 3
Command & menu keys
The keys select commands and settings. Each menu key lines up with a different section of the dynamic
menu area. The four keys across the bottom select commands and settings which will vary according to
the screen displayed on the LCD.
The four keys on the right side of the LCD are used to scroll through lists, adjust sliders, select an action,
or return to the previous screen. The associated commands on the right side of the Dynamic Menu Area
vary by screen and include the following:
Function Key
The Function key accesses the Main Menu screen. From the Main Menu, the Function key accesses
additional menu options. From any other screen, it returns to the Main Menu.
Take Key
The Take key functions much like the Enter key on a computer keyboard. Pressing the Take key instructs
the system to execute a selected operation. Prior to pressing the Take key, the individual operation
component(s) must be selected by pressing the Select key.
CP-20A operations combine the following four basic tasks:
CP-20A Instruction Manual
Dynamic Command Keys
Back key – Use to return to the last screen. This key will not undo a completed operation.
Arrow keys – Use to scroll through lists and adjust sliders. When scrolling, press and hold an
arrow key to increase scrolling speed. When at the bottom of a list, press the down key to
access the top of the list. When at the top of a list, press the up key to access the bottom of the
list. Scrolling from the bottom of a list may sometimes be more efficient depending on the
matrix size.
Select key – Use to enter a selection. This key will not execute operations.
To choose a command – Press the dynamic menu key along the bottom that corresponds with
the command you want to choose.
To locate values for fields (such as virtual matrix, input, output, and preset values) – Press the
dynamic menu keys on the right that correspond to the arrows.
To enter a selection – Press the Select key. (The key that corresponds to the Select option on
the dynamic menu area is found on the right.)
To execute an operation – Press the Take key.
Back Key
Navigation Keys
Select or Mute Key
Take Key
Introduction
3