Changing The Virtual Matrix - AMX CP-20A Instruction Manual

Executing Switches
5.
Locate Input 10: DVD #1 Control Rm by scrolling through the list using the arrow keys.
6.
Press the Select key.
Input 10: DVD #1 Control Rm is highlighted.
7. Press the Take key to execute the operation.
The switch to Output 15: Main Monitor Rm B from Input 10: DVD #1 Control Rm occurs as
soon as the Take key is pressed.
The system returns to the Change Output screen.
8. Make additional switches.
Or
Press the Function key to return to the Main Menu screen.

Changing the Virtual Matrix

Virtual matrices are defined in XNConnect and stored in the system's configuration file (see the
XNConnect Help file). Systems usually have a virtual matrix that contains all signals, so that any input
can be routed to any or all outputs. The same system may have other VMs that switch only audio signals
or only video signals.
Occasionally you may need to execute switches (or other operations) on a virtual matrix other than the
current virtual matrix. Changing the virtual matrix does not change the default virtual matrix. The
system will revert to switching on the default virtual matrix when the power is cycled.
The example below gives the steps for changing from routing signals on the "Audio follow Video,"
virtual matrix, to routing on the "Audio, Stereo" virtual matrix that switches only audio signals.
Although this example accesses the VM (Virtual Matrix) option from the Change menu, this option can
be selected from most of the command menus found along the bottom of the screen.
8 CP-20A Instruction Manual