Table of Contents
Advertisement
3.
Press the Select key.
The Change Output screen appears, displaying the available output options.
Note: If other outputs are already routed to the selected input, they are highlighted on the
Change Output screen.
4.
Locate Output 2 by scrolling through the list using the arrow keys.
5.
Press the Select key.
Output 2 is highlighted.
6.
Press the Take key to execute the operation.
The switch from Input 1 to Output 2 occurs as soon as the Take key is pressed.
The system returns to the Change Input screen.
If the system is not working properly, check all system connections and retry the test switch before
contacting technical support, (for contact information, see page 39).
CP-20A Instruction Manual
Installing a CP-20A Remote
37
Advertisement
Table of Contents
