Table of Contents
Advertisement
General keystrokes, example
The following is a general description in keystrokes and display readout on the controller. The following example, of
changing the tank contents value, is used to illustrate this. Try it! The same method is used in all the menus.
μ
ATTENTION! The top line of symbols will stay shaded, unless the symbols are relevant. When a menu is open, the
flashing number or value is the one that can be altered.
Press
to enter the menu system [1 MAIN MENU].
The 2nd line shows the menu number.
The 3rd line shows the present menu.
The 4th line shows a choice.
÷
NOTE! The menu number [1] is flashing.
Press
to enter menu [1.1 DAILY SETTINGS].
Press
to scroll to menu [1.2 Tank].
÷
NOTE! The last digit of the menu number [1.2] is flashing.
Press
to enter menu [1.2.1 Tank contents].
÷
NOTE! The value that can be changed is flashing.
Press
or
to move the select the digit.
Press
or
to set the desired value in litres.
Press
to confirm.
Press
and hold, to exit the menu system.
3 - Description
1
MAIN MENU
Daily settings
1.2
DAILY SETTINGS
Tank
1.2.1
TANK CONTENTS
XXXX L
19
Advertisement
Table of Contents
