Table of Contents
Advertisement
Setup Menu List
Network
Menu item
(Parameter)
IP Address
Subnet Mask
Default Gateway
MAC Address
DHCP
Static Address
IP Address
Subnet Mask
Default Gateway
LCD
Menu item
(Parameter)
Contrast
Brightness
Memory
Menu item
(Parameter)
Internal Memory
Recall
Store
USB Memory
Load Settings
Save Settings
Format
Factory Reset
Menu item
(Parameter)
Factory Reset
System Reboot
Menu item
(Parameter)
System Reboot
Information
Menu item
(Parameter)
Version
Uptime
FPGA
FAN
32
Value
(Bold: default)
–
–
–
–
Selects how to configure the IP address, subnet mask and default gateway.
When selected, press the [PAGE/CURSOR] knob.
Client
Static
Press the [PAGE/CURSOR] knob to configure the IP address, subnet mask and default gateway manually.
000.000.000.000–192.168.010.010–255.255.255.255
000.000.000.000–255.255.255.000–255.255.255.255
000.000.000.000 –192.168.010.001–255.255.255.255
Value
(Bold: default)
1–16
1–8–16
Value
(Bold: default)
This recalls and saves the settings to/from internal memory.
NO.
1–8
(Execute)
NO.
1–8
(Execute)
These parameters load or save files to/from a USB flash drive.
vc100uhd.bin
(Execute)
vc100uhd.bin
(Execute)
(Execute)
Value
(Bold: default)
(Execute)
Value
(Bold: default)
(Execute)
Value
(Bold: default)
–
–
–
–
Explanation
Shows the IP address.
Shows the subnet mask.
Shows the default gateway.
Shows the MAC address.
The IP address and other information needed for connecting to the network is
obtained automatically from the DHCP server of the LAN.
The IP address, subnet mask, and default gateway are specified manually.
Explanation
Adjusts the contrast of this unit's display.
Adjusts the brightness of this unit's display.
Explanation
Selects the settings to recall to current memory from internal memory.
Press the [PAGE/CURSOR] knob to recall the selected settings.
Selects where to save the parameter memories.
Press the [PAGE/CURSOR] knob to save the parameter memories.
Loads the file named "vc100uhd.bin" from the USB flash drive.
Press the [PAGE/CURSOR] knob to load the file.
Saves the file named "vc100uhd.bin" to the USB flash drive.
Press the [PAGE/CURSOR] knob to save the file.
Formats the USB flash drive.
When you press the [PAGE/CURSOR] knob, format is executed.
Explanation
Returns the settings of the unit to their factory-set state.
When you press the [PAGE/CURSOR] knob, factory reset is executed.
Explanation
Reboot VC-100UHD.
When you hold down the [PAGE/CURSOR] knob and press the [VALUE] knob,
reboot is executed.
Explanation
Displays the system program version.
Shows how long this unit has been operating.
Shows the internal IC temperature.
Shows the rotation speed (rpm) of the internal fan.
Advertisement
Table of Contents
