Table of Contents
Advertisement
Setup Menu List
Channel
CH. 1–8 0
Source
Menu item
(Parameter)
Source
CH. 1–8 0 Main Processing, Sub Processing 0
Menu item
(Parameter)
Dynamic Range
Correction
Gamma Correction
Upscale Interpolation
Edge Enhancer
Color Correction
Brightness
Contrast
Saturation
Red
Green
Blue
Copy Settings from
CH. 1–8 0 Main Processing, Sub Processing 0
Menu item
(Parameter)
Type
26
Value
(Bold: default)
SDI, HDMI, Pattern Generator
Value
(Bold: default)
-64–0–+63
-0.30–1.00–3.30
Nearest-neighbor, Bilinear, Bicubic
0–15
Calibrates the color.
-128–0–+127
-128–0–+127
-128–0–+127
-128–0–+127
-128–0–+127
-128–0–+127
Previous, Initial, Main Proc.,
Sub Proc., USB Streaming,
Channel 1–8
(Execute)
Value
(Bold: default)
This sets how the input video is enlarged or reduced (the scaling type).
Fill
Letter-box
Crop
Dot by Dot
Explanation
Selects the input source.
Effects
Explanation
Calibrates the dynamic range.
Adjusts the gamma value.
Sets the method of interpolation when the video is enlarged.
Adjusts how much the edges of objects in the image are emphasized.
This produces good results when you are sitting back a certain distance from
your LED display.
* The effect differs depending on the "Upscale Interpolation" setting.
Adjusts the brightness.
Adjusts the saturation.
Adjusts the contrast.
Adjusts the red level.
Adjusts the green level.
Adjusts the blue level.
Copies the parameter settings in "Effects" from another channel or other
source.
Previous:
The last value set
Initial:
The default value
Press the [PAGE/CURSOR] knob to copy the settings.
Scaling
Explanation
Always displays the picture expanded to full screen,
irrespective of the aspect ratio of the input video.
Enlarges or reduces the incoming video to a
full-screen view while keeping the aspect ratio
unchanged.
Enlarges or reduces the incoming video so that the
output picture has no blank margins while keeping
the aspect ratio unchanged.
Displays at the input resolution, ignoring the scaling.
ROI
ROI
ROI
ROI
Advertisement
Table of Contents
