Table of Contents
Advertisement
Other Functions
6 .
Select the "Use the following IP address" check box,
and input the numbers shown below.
IP address
Subnet mask
Default gateway
7 .
Select the "Obtain DNS server address automatically"
option, and then click the [OK] button.
Mac OS
Display the Apple menu 0 "System Preferences" 0
1 .
"Network."
2 .
From the list on the left, select the network connection
service you're using.
3 .
Set "Configure IPv4" to "Manually," and input the
numbers shown below.
IP Address
Subnet Mask
Router
4 .
Click the [Apply] button.
20
192.168.10.11
255.255.255.0
192.168.10.1
192.168.10.11
255.255.255.0
192.168.10.1
Returning to the Factory Settings
(Factory Reset)
Here's how you can return the settings of the unit to their factory-set
state.
If following the procedures described in this manual does not cause
the result you expect, try executing a factory reset.
NOTE
The contents of all settings you've made thus far, and the settings
saved in internal memory are lost when you perform a factory reset.
Select Root menu "System" 0 "Factory Reset," and
1 .
then press the [PAGE/CURSOR] knob.
2 .
Press the [PAGE/CURSOR] knob.
Factory reset is executed.
When the operation is finished, the message "Done. " appears.
Advertisement
Table of Contents
