Table of Contents
Advertisement
System
Frame Rate
Menu item
Value
(Parameter)
Frame Rate
50.00 Hz,
Genlock
Menu item
Value
(Parameter)
This sets the genlock source.
Internal
External
Source
SDI
About the output from the REFERENCE THRU/OUT connector
When this unit is operating with sync set to "Internal" or "SDI, " the sync signal inside the unit is output as a black burst.
When this unit is operating with sync set to "External" or "SDI, " the external sync input is output as-is.
Line Adjust
-2160–0–+2160
HDCP
Menu item
Value
(Parameter)
HDCP
Disabled, Enabled
Fade Time
Menu item
Value
(Parameter)
Fade Time
0.0s–0.5s–1.0s
Orientation
Menu item
Value
(Parameter)
Center, Top Left
Orientation
Panel Lock
Menu item
Value
(Parameter)
Disabled, Enabled
Panel Lock
(Bold: default)
59.94
Hz, 60.00 Hz
(Bold: default)
(Bold: default)
(Bold: default)
(Bold: default)
(Bold: default)
Explanation
Sets the system's frame rate.
The configurable formats change for each processing system.
Explanation
Sets the source to internal sync (free-run).
Syncs to the analog external sync signal input to the REFERENCE IN connector.
Syncs to the input from the 12G-SDI IN connector.
Corrects delays in the genlock line.
Explanation
If this is set to "Enabled, " copy-protected (HDCP) video can be input. Also, HDCP
is applied to the video that is output.
* If this is set to "Enabled, " video is not output from the 12G-SDI OUT connector
and STREAMING port.
Explanation
Sets the fade time.
Explanation
Sets the reference point when scaling.
Explanation
Enables/disables the panel lock function.
When this is set to "Enabled, " the panel automatically locks (the display goes
dark) when it is not operated for at least one minute.
Hold down the [SETUP] button to unlock the panel.
Setup Menu List
31
Advertisement
Table of Contents
