Table of Contents
Advertisement
Setup Menu List
Processing
Input
Menu item
(Parameter)
Channel
Source
State
Main Processing
Menu item
(Parameter)
Format
Fade to Black
Color Gamut
Dynamic Range
Flip H
Flip V
Rotation
ROI (Region of Interest)
Size H
Size V
Position H
Position V
Masking Color
Sub Processing
Menu item
(Parameter)
Sub Processing
Format
Fade to Black
Color Gamut
Dynamic Range
Flip H
Flip V
Rotation
ROI (Region of Interest)
Size H
Size V
Position H
Position V
Masking Color
24
Value
(Bold: default)
CH.
1–8
–
–
Value
(Bold: default)
Refer to "Output video formats"
(p. 9)
This sets whether the fade effect applied to the output video uses the FTB function or not.
THRU
FTB
Auto
REC.601, REC.709, REC.2020,
Auto
SDR, HDR PQ, HDR HLG,
Disabled, Enabled
Disabled, Enabled
Disabled, Enabled
Disabled, Enabled
0–16384
0–4320
-16384–0–+16384
-4320–0–+4320
Black, White, Red, Green, Blue,
Yellow, Cyan, Magenta
Value
(Bold: default)
Disabled, Enabled
Refer to "Output video formats"
(p. 9)
This sets whether the fade effect applied to the output video uses the FTB function or not.
THRU
FTB
REC.601, REC.709, REC.2020,
Auto
Auto
SDR, HDR PQ, HDR HLG,
Disabled, Enabled
Disabled, Enabled
Disabled, Enabled
Disabled, Enabled
0–16384
0–4320
-16384–0–+16384
-4320–0–+4320
Black, White, Red, Green, Blue,
Yellow, Cyan, Magenta
Explanation
Selects the channels to input to the processing system.
If the input source is the same before and after switching, the video cuts to the
next one. If the input source differs, the video switches by fading to black.
Shows the source selected for the channel.
Shows the status of the signal from the source selected for the channel.
Explanation
Sets the output format.
* The selectable formats differ depending on the system's "Frame Rate" value
(p. 31).
The FTB function is not used.
The FTB function is used to fade the output video to black.
* The fade time is set in the "Fade Time" system parameter (p. 31).
Specifies the color gamut.
Specifies the dynamic range.
Set this to "Enabled" to flip (invert) the video horizontally.
Set this to "Enabled" to flip (invert) the video vertically.
Set this to "Enabled" to rotate the video clockwise 90°.
Enables/disables the ROI function.
Sets the ROI's horizontal size in pixels.
Sets the ROI's vertical size in pixels.
Sets the ROI's horizontal position in pixels.
Sets the ROI's vertical position in pixels.
Sets the color of the area outside of the ROI.
Explanation
Enables/disables the sub processing.
* Set this to "Disabled" when EDID (p. 29) is set to "Sink Through" in "Input"
0 "HDMI, " or when "Rotation" (p. 24) in Main Processing is set to "Disabled. "
Sets the output format.
* The selectable formats differ depending on the system's "Frame Rate" value
(p. 31).
The FTB function is not used.
The FTB function is used to fade the output video to black.
* The fade time is set in the "Fade Time" system parameter (p. 31).
Specifies the color gamut.
Specifies the dynamic range.
Set this to "Enabled" to flip (invert) the video horizontally.
Set this to "Enabled" to flip (invert) the video vertically.
Set this to "Enabled" to rotate the video clockwise 90°.
Enables/disables the ROI function.
Sets the ROI's horizontal size in pixels.
Sets the ROI's vertical size in pixels.
Sets the ROI's horizontal position in pixels.
Sets the ROI's vertical position in pixels.
Sets the color of the area outside of the ROI.
Advertisement
Table of Contents
