Table of Contents
Advertisement
USB Streaming
Menu item
Value
(Parameter)
Refer to "Output video formats"
Format
(p. 9)
Sets the frame rate for USB streaming.
Frame Rate
Full
Half
This sets whether the fade effect applied to the output video uses the FTB function or not.
THRU
Fade to Black
FTB
–
Connection
(Reset)
Audio
0–100–127
Output Level
Disabled, Enabled
Equalizer
Hi Freq
20–10k–20k
Hi Gain
-12–0.0–+12
0.3–1.0–16
Mid Q
Mid Freq
20–1.25k– 20k
Mid Gain
-12–0.0–+12
Lo Freq
20–160–20k
Lo Gain
-12–0.0–+12
Disabled, Enabled
Mastering
-24–0–-12dB
Enhancer
0–24
Sense
-24–0dB
Level
(Bold: default)
Explanation
Sets the output format.
* The selectable formats differ depending on the system's "Frame Rate" value
(p. 31).
Uses the same frame rate as the system.
Sets the frame rate to half of the system's frame rate.
The FTB function is not used.
The FTB function is used to fade the output video to black.
* The fade time is set in the "Fade Time" system parameter (p. 31).
Shows the connection status.
Press the [PAGE/CURSOR] knob to reconnect.
Adjusts the USB audio signal output level.
Enables/disables the equalizer.
Specifies the center frequency when changing the tone quality in the high band.
Boosts or attenuates the high band.
Adjusts the width of the frequency band when boosting or attenuating the
middle band.
Specifies the center frequency when changing the tone quality in the middle
band.
Boosts or attenuates the middle band.
Specifies the center frequency when changing the tone quality in the low band.
Boosts or attenuates the low band.
Enables/disables the mastering.
Adjusts the audio clarity.
Adjusts how much the mastering effects are applied.
Adjusts the volume of the mastered sound.
Setup Menu List
25
Advertisement
Table of Contents
