Table of Contents
Advertisement
Other Functions
Network Connections and Settings
You can send commands from your computer on the network to remotely control the unit's settings.
* For details on the commands to transmit, refer to "LAN Command Reference" (p. 33).
The content of the settings depends on your network environment.
This is an example of how to directly connect the VC-100UHD to your computer using a LAN cable.
Connection
VC-100UHD
MEMO
The LAN cable can be either a cross-cable or a straight cable.
Specifying the unit's network settings
Select Root menu "System" 0 "Network" 0 "DHCP."
1 .
2 .
Turn the [PAGE/CURSOR] knob to select "Static," and
then press the [PAGE/CURSOR] knob.
Value
Explanation
The IP address and other information needed
Client
for connecting to the network is obtained
automatically from the DHCP server of the LAN.
The IP address, subnet mask, and default gateway
Static
are specified manually.
3 .
Turn the [PAGE/CURSOR] knob to select "Static Address,"
and then press the [PAGE/CURSOR] knob.
4 .
Configure the IP address, subnet mask and default
gateway as shown below.
Parameter
IP Address
Subnet Mask
Default Gateway
5 .
Press the [SETUP] button three times to return to the
Root menu screen.
Computer
Setting
192.168.010.010
255.255.255.000
192.168.010.001
Specifying your computer's network settings
Windows
1 .
Working in sequence, click the [
"Settings" (gear icon).
2 .
Click "Network and Internet."
3 .
Click "Change Adapter Options."
4 .
Right-click the network connection you're using, then
click "Properties."
5 .
Select "Internet Protocol Version 4 (TCP/IPv4)" and click
the [Properties] button.
(Start)] button 0
192
168
10
11
255
255
255
0
192
168
10
1
19
Advertisement
Table of Contents
