Analog In/Out (In Usb Audio/Midi Mode); Usb Cc Mode - Elektron Analog Heat MKII User Manual

Stereo analog sound processor
Hide thumbs Also See for Analog Heat MKII:
Table of Contents

Advertisement

6.5.2 ANALOG IN/OUT (IN USB AUDIO/MIDI MODE)

Sets if the signal from the analog inputs (INPUT L/R) is routed to the effect or not. It also sets if the
signal from the Analog Heat MKII's FX is routed to analog outputs (OUTPUT L/R and HEADPHONES)
or not. These are the settings if USB AUDIO+MIDI mode is chosen in the USB CONFIG menu. For more
information, please see "6.8.1 USB CONFIG" on page 23.
ANALOG IN
• AUTO In AUTO mode, Analog Heat MKII automatically detects if a class compliant USB audio host
(computer, smartphone, etc.) is connected or not. If no USB audio host is connected, the signal is
routed from Analog In through the Analog Heat MKII's FX to the Analog Out. (Same as the IN+OUT
setting.) With the USB audio host connected, the audio routing in AUTO mode depends on which
option is selected by the USB CC MODE parameter:
INSERT sets ANALOG IN/OUT to IN+OUT.
PRE sets ANALOG IN/OUT to OUT.
POST sets ANALOG IN/OUT to IN.
BYPASS sets ANALOG IN/OUT to OFF.
• IN+OUT Both Analog In and Analog Out are routed to the Analog Heat MKII's FX.
• IN Routes the signal from Analog In to the Analog Heat MKII's FX.
• OUT Routes the signal from the effect to Analog Out.
• OFF Neither Analog In nor Analog Out are routed to the Analog Heat MKII's FX.

6.5.3 USB CC MODE

Sets how and where, in the signal chain, the signal between the Analog Heat MKII and the class com-
pliant USB audio host (computer, smartphone etc.) is routed. This parameter is only available if USB
AUDIO+MIDI mode is chosen in the USB CONFIG menu. For more information, please see "6.8.1 USB
CONFIG" on page 23.
ANALOG IN
• INSERT Routes the audio bi-directionally over USB between the Analog Heat MKII's FX (distortion
circuit, EQ, and filter) and the USB audio host.
• PRE Routes the audio from Analog In to the USB audio host and then back to the Analog Heat
MKII's FX.
• POST Routes the audio from the Analog Heat MKII's FX to the USB audio host and then to the
Analog Out.
• BYPASS Routes the audio from Analog In to the USB audio host and then to Analog Out without
being affected by the Analog Heat MKII's FX.
ANALOG HEAT MKII
FX
IN
OUT
CLASS COMPLIANT
USB AUDIO HOST
ANALOG HEAT MKII
FX
FX TO USB
CLASS COMPLIANT
USB AUDIO HOST
6. THE SETTINGS MENU
ANALOG OUT
ANALOG OUT
USB TO MAIN
19

Advertisement

Table of Contents
loading

Table of Contents