Drive; Level; Mix; Settings Menu - Elektron Analog Heat +FX Quick Manual

5.6 DRIVE

DRIVE sets the gain level in the effect circuit in the Heat block. A higher setting increases
the effect of the selected circuit type, typically resulting in more distortion.

5.7 LEVEL

LEVEL sets the level of the signal coming from the effect of the Heat block. It is applied
before the MIX parameter.

5.8 MIX

MIX sets the mix of the clean signal and the signal that is affected by the Heat block's effect.

5.9 SETTINGS MENU

Press [SETTINGS] to access the SETTINGS menu.
Scroll through the list of settings by using the NAVIGATION knob. Open a highlighted
menu by pressing the NAVIGATION knob or [YES]. To change the settings in the menus,
first press, and then turn the NAVIGATION knob.
5.10 PARAMETER PAGES
Press a [PARAMETER] page key to access the corresponding parameter pages [FLOW],
[HEAT], [FX], and [MOD]. There are usually several parameter pages associated with each
key. You access these pages by turning the NAVIGATION knob.
20