Advantech IPPC-5211WS Series User Manual page 72

C.2.2.8 IDE Configuration

Serial-ATA (SATA)
This item allows users to enable or disable SATA devices.

SATA Test Mode
Test Mode enable / disable..

SATA Speed Support
Indicates the maximum speed the SATA controller can support.

SATA ODD Port
SATA ODD is Port0 or Port1.

SATA Mode
This item allows users to select SATA mode selection. (Determines how SATA
controller(s) operate)

Serial-ATA Port 0 / Port1
Enable / Disable Serial ATA Port0 / Port1.

SATA Port 0 / Port1 HotPlug
Enable / Disable SATA Port0 / Port1 hotplug function.
Note! Before installing WEC7 image, IDE configuration must set SATA Mode
to IDE Mode in BIOS to boot successfully.
IPPC-5211WS Series User Manual 64