Cleaning and maintenance
-> Example
Empty the glass
flask
52
7.2 Cleaning
This chapter does not contain descriptions for decontamination
of the product. This chapter describes simple measures for
cleaning and care.
ð Before cleaning, switch off the pumping unit.
7.2.1 Housing surface
Clean the surfaces
Clean dirty surfaces with a clean, slightly damp cloth. We rec-
ommend using water or mild soapy water to moisten the cloth.
7.2.2 Empty the glass flask
Remove and empty the glass flask
1. Open the joint clamp and
remove the glass flask.
3. Secure the glass flask (separator) to the condenser again
using the joint clamp.
Depending on the application, the liquid collected can either
be retreated or professionally disposed of.
20901118_EN-US_PC301x VARIO select Serie_V1.3_100720
2. Empty the glass flask into
a suitable container,
e.g., chemical-resistant
drum.