Controller Base - vacuubrand PC301 VARIO select Series Instructions For Use Manual

Installation and connection
Mount the base to
the pumping unit
(option)
30

4.3 Controller base

The base, controller, screw fittings and vacuum sensor are en-
closed separately. Before installation, the base can be mounted
on the pumping unit and the controller clipped into place.
Alternatively, the controller can be clipped into a recess in the
lab furniture.
Mount the base
1. Unscrew the screw fittings
from the pumping unit;
Phillips screwdriver size 1.
3. Turn in the screw fittings
with the base.
20901118_EN-US_PC301x VARIO select Serie_V1.3_100720
2. Position the base on the
pumping unit.
4. Clip the controller into the
base.