Table of Contents
Advertisement
AHLink
30
SERIAL
Serial number
VER
Firmware version
OPEN: Factory screen working position
MEM: Memorized screen working position
CLOSE: Close monitor
CLOSE_FU: Horizontal screen face up working
position
DISP: Turns the display ON or OFF
DVIA, DVI1, DVI2: Input selection
BACKL: Backlight adjustments
CONTR: Contrast adjustments
BRIGHT: Brightness adjustments
SAVE VALUES: Memorises the backlight,
contrast and brightness values
AHLINK OFF: Turns off the AHlink signal
COMMAND: Information of the last AHnet
command received from RS422 port
SENSORS: Indicates sensor status
S1 Indicates the screen horizontal position
S2 Indicates the rear protection cover
S3 Indicates screen work rotated position
S4 Indicates screen close rotated position
AHNET ADDRESS: AH address settings
POSITION: Screen position
PASSWORD: Access to the factory's settings
Advertisement
Table of Contents
