Table of Contents
Advertisement
INPUT CONNECTORS
Termination:
Activate (ON) the termination. Only on the last
unit of the
RS422 bus.
AHnet:
RJ45 CAT6 connector for addressable RS422 control. There is a loop
through connector to use as signal RS422 output. Up to 30 monitors can be
connected on the same RS422 bus.
USB:
USB connector for touch screen. This connector is active depending of
the monitor model.
DVI 1/ DVI A:
DVI-I input signal. Connect a DVI (digital) input signal and
select DVI 1 on the OSD monitor menu. Use a DVI to VGA adaptor to
connect an ARGB (analogue) input signal and select DVI-A on the OSD
monitor menu.
DVI 2:
DVI-D input signal. Connect a DVI (digital) input signal and select
DVI 2 on the OSD monitor menu.
- Use high quality DVI cables with 2m maximum length.
22
Advertisement
Table of Contents
