Table of Contents
Advertisement
SE LP10
FE6600/BL6600/MP6600 Series Multi-point Lock
Installation Instructions
7
Installation Instructions, continued
Install Inside Rose and Inside Lever Assembly
n
1. Rotate the inside rose counter-
clockwise to seat the threads,
then rotate clockwise to
securely tighten.
2. Slide lever handle onto spindle
until fully seated. The handle
must be horizontal and facing
the hinge side of the door.
3. Push lever onto spindle so
minimum gap is visible.
4. Tighten the set screw securely
with a 1/8" hex wrench.
5. Before closing the door, test
that the lever is functional and
the operation of the latchbolt
and deadbolt is smooth.
Attaching Front Plate
o
Attach front plate with (2) #8-32x1/4" flat head screws and tighten securely.
For installation assistance contact Corbin Russwin
1-800-543-3658 • techsupport.corbinrusswin@assaabloy.com
Copyright © 2017, 2020 ASSA ABLOY Access and Egress Hardware Group, Inc. All rights reserved. Reproduction in whole
or in part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.
Outside of
Door
18
Spindle
Rose
Set
Screw
Inside
Lever
(2) 8-32x1/4"
Flat Head Screws
FM456 08/20
Advertisement
Table of Contents
