Table of Contents
Advertisement
SE LP10
FE6600/BL6600/MP6600 Series Multi-point Lock
Installation Instructions
7
Installation Instructions
Verify Hand and Bevel of Door
a
Stand on outside of locked door when determining door hand.
Left Hand
Hinges Left
Open Inward
Door Preparation
b
Prepare door according to appropriate template. If necessary, refer to website:
www.intelligentopenings.com
Templates:
• Field: FM447 and FM448 template ships with product.
• Manufacturer: 4740 metal and wood door.
Raceway for
Power
(Optional)
Cable Hole
Outside
Cylinder
Hole
(only with
cylinder
installation)
Lever Holes
For installation assistance contact Corbin Russwin
1-800-543-3658 • techsupport.corbinrusswin@assaabloy.com
Copyright © 2017, 2020 ASSA ABLOY Access and Egress Hardware Group, Inc. All rights reserved. Reproduction in whole
or in part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.
LH
LHRB
Left Hand
Reverse Bevel
Hinges Left
Open Outward
•
Prior to installation, make sure all holes are free of burrs, debris and sharp edges.
•
If doors are not properly reinforced per ANSI 115.2, commercially available reinforcements
should be installed.
Outside of Door
RH
Right Hand
Hinges Right
Open Inward
Inside of Door
Through-bolt Hole
Through-bolt Hole
Mortise
Pocket
RHRB
Right Hand
Reverse Bevel
Hinges Right
Open Outward
Raceway for Power
(Optional)
Cable Hole
Inside of Lock body Wire
Hole
Thumb Turn Hole
Lever Holes
10
FM456 08/20
Advertisement
Table of Contents
