Unpacking Your Craftbot Printer; Contents Of The Box - CraftBot Plus PRO User Manual

1.4. Unpacking your CraftBot printer

1. Place the CraftBot box on the ground on a level surface. Make sure that there is a lot of open space around you.
2. Open the box with care, not to damage the contents if using a blade.
3. Remove the protective foam insert. You will find the Quick Starter Guide located within the top protective foam
insert.
4. There is a Box inserted, which contains the accessories (including a pendrive with a copy of the CraftBot user
manual). Remove the Box with care as it supports the extruder during shipping.
5. Now you will find the CraftBot 3D printer itself completely enclosed in a protective plastic bag. Open the plastic
covering.
6. Firmly grasp the frame of the CraftBot. Consider its weight. Request physical help if needed. Make sure not to
touch the extruder or the electronic panel inside the appliance! Lifting points on the CraftBot are under the Front
LCD Panel and the hand dole in the back panel.
7. Place the CraftBot 3D printer on a stable and level surface with sufficient space surrounding around it.

1.5. Contents of the box

It's time to unpack additional parts. Below you can see con- tents of the box. First of all, check the list to make sure
nothing is missing!
1. Filament guide tube holder
2. Filament guide tube
3. Filament spool holder
4. Filament spool
5. Hex wrenches (5x)
6. USB Flash storage
7. Nozzle kit which includes assortment
of Nozzles, spacer card and nozzle
spanner/wrench
8. USB A-B cable and AC power cable
9. Filament monitoring system (FMS)
1 2
4 5
7 8
USER GUIDE
3
6
9
5