CraftBot Plus PRO User Manual page 22

The "Options" menu is located on the right side of the screen. In the pop-up window you can set the language,
graphics, keyboard commands, colors and Craftbot type. All build areas of all the craftbots are-pre-set and
programmed in.
•
Click on the "Add" button located in the top row of icons. Select the 3D design plan you must print. The selected
object will appear at the center of the virtual build plate.
• To generating the toolpath information (gcode) Click
on the Slice button to the right side of the screen.
A new screen pops up with options to specify the
printing quality and material to be used.
•
Saving the gcode by clicking the "slice" button
bottom right.
• You can save the generated gcode onto a USB
drive and place it into the top of the printer or send
information directly to CraftBot if connected via USB
cable. For detailed user's instruction of CraftWare,
download the user manual from craftbot.com.
• After slicing, save the G code to a flash drive or
transfer a USB cable to CraftBot. The program
provides easy access to the most important
information at www.craftunique.com.
USER GUIDE
22