Applying A New Layer Of Protective Kapton Sheet To Your Build Plate; Guarantee; Limitation Of Liability - CraftBot Plus PRO User Manual

13. APPLYING A NEW LAYER OF PROTECTIVE KAPTON SHEET TO YOUR
BUILD PLATE
Build plate Kapton sheets get worn out in time or can be damaged by the nozzle due to incorrect levelling or
removing the printed models. Reapplying a new Kapton sheet is essential to maximize print qualities if the old one
has issues/ damages. To reapply a new Kapton sheet, take the build plate out of the machine and remove the old
sheet by striping it off of the glass plate. Clean the surface of the glass plate with acetone.
Remove the protective plastic backing sheet (keep this safe for use later) from the new Kapton sheet in order to get
to the sticky side. Apply some window cleaning liquid onto the plate and the sticky side of the sheet to help you to
correctly the position the sheet on the build plate. Align the Kapton to the front side of the plate (the edge closest to
the screws) on the corner. Once the positioning is correct, squeeze out the access liquid from between the plate and
the sheet with a thin but solid object, like a used credit card. Place the protective sheet (which was removed in the
beginning) on top the new Kapton to prevent scratches and damages during this process.
Start from the center of the plate and move horizontally and vertically. Once all the liquid has been squeezed out and
the sheet is applied properly, put the plate somewhere to dry. Allow the sticky part to rest for a day before using.

14. GUARANTEE

For special conditions relating to the product guarantee, see the "Guarantee Statement" on a separate sheet, which
is also delivered with the product as well.

15. LIMITATION OF LIABILITY

With the exceptions included in the regulations concerning the guarantee and to the greatest extent permitted by
the relating act, CRAFTUNIQUE Ltd. is not responsible for any direct, indirect, specific, stochastic or consecutive
damage claims which are stem from the breaching of the terms of guarantee, respectively any other legal theory,
included, but not limited to:
•
the loss of usability
•
the loss of income, the loss of actual or expected profit (including the profit from contract), the loss of expected
saving, loss of business, loss of opportunity,
• the loss of a fair name and injury to a fair name,
• the loss, injury or perishing of data,
•
any indirectly or consecutively caused damage or loss, including the damage caused by the changing of
equipment/installation or property, respectively
• the cost of the restoration or reproduction of data stored or used on the Product
The restriction above does not refer to CRAFTUNIQUE Ltd.'s legal liability for intentional, serious negligence and/or
default. Certain jurisdictions don't allow the exclusion or limitation of accidental or consecutive damage, therefore if
such jurisdiction regulates the guarantee, the restrictions above does not refer to You.
USER GUIDE
31