Table of Contents
Advertisement
12. FIRMWARE UPDATE
12.1. Firmware update with new software
Updating the firmware adds new function(s) and improves performance. CAUTION: NEVER turn OFF the computer or
disconnect USB cable while updating the firmware.
1.
Download CraftPrint® software from Craftunique® website:
2.
Install the CraftPrint® application on your computer.
3.
Download the pr3Dator® firmware file from Craftunique website and extract the ZIP file on your computer. Please
read the attached Release Notes.
4.
Connect the printer to your computer with USB cable.
5.
Open the CraftPrint program.
6.
Select the "Load custom firmware from file" from „ ..." menu.
7.
Select and open the *.firmware file
8.
On successful load you got message, click OK!
9.
Open again the "..." menu and select Update CraftBot firmware from loaded file...
https://craftbot.com/craftware/
https://www.craftunique.com/firmware
USER GUIDE
28
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Plus PRO and is the answer not in the manual?