Reset Settings; Fms System (Optional Feature) - CraftBot Plus PRO User Manual

6.6. Reset settings

You can reset all settings.
• Select the Settings menu
•
Select the circle arrow

6.7. FMS system (optional feature)

The filament monitoring system observes the filament flow during printing. If the printer detects a jam during the
printing process, it will try to resolve it on its own. If it is unable to resolve the jam, then an error message will appear
on the LCD display and the printer will also send an email message. For this please make sure the Wi-Fi and e-mail
address in the settings are setup correctly.
•
Connect the FMS to the machine on the back side.
• Select the Settings menu
• Here you can view the status and see whether the function is turned on or off. You can change this with the
button.
on the LCD screen and go to the page 6. Select the Reset circle arrow icon
again, and press OK.
on the LCD screen and go to the page 4. Select the FMS settings icon
USER GUIDE
.
.
18