Other Menu Settings; Adjusting The Lighting; Activating The Fans - CraftBot Plus PRO User Manual

6. OTHER MENU SETTINGS

6.1. Adjusting the lighting

• Select the Settings menu
• You will see a variance pop up on the screen: two different touchscreen sliders.
•
Adjusting the lighting: Move the line from the left to the right to vary the brightness of either the interior LED
lighting of the CraftBot or the LCD display backlighting.

6.2. Activating the fans

•
Select the Settings menu
•
Switch between 3 fans (object, extruder, case ) by pressing arrows. The name of the fan to be controlled is displayed
at the top of the screen.
The fan Control: Activate and deactivate the fans before or during printing to match your preferences. Extruder and
case fan settings automatically reset to default after 60 seconds.
on the LCD screen and on page 1. Select the Lighting settings
on the LCD screen and on page 1. Select the Fan control
USER GUIDE
icon.
icon.
15