Sound Settings; Report Function - CraftBot Plus PRO User Manual

6.3. Sound settings

• Select the Settings menu
• Select the Bell icon
•
Use the arrows in the top right corner you can choose between 3 options:
- Sound On
- Sound Off
- Warnings Only

6.4. Report function

Registered users on the Craftbot.com website can register their printer using its serial number on the website.
After registration, and assuming both the function is switched on and that the printer is connected to Wi-Fi then
the printer every day at midnight or at the very first power on of that day will automatically send the actual hours of
operation, plus the filament usage of the printer to the users account.
On the website with help of time filtering users can check their printer's usage (how many hours they printed in a day)
and how much filament used.
• Activate the Wi-Fi on your printer.
• Select the Setup menu
• Select the Report button
•
Before setting up this feature, connect to the Wi-Fi network as described above.
• Select the second button
• To activate, you will need the serial number of the printer, which is located on a sticker behind the display (or at
the back of the printer). Enter this 8-digit line in the new interface and accept it with the check mark in the right
corner.
on the LCD screen and go to the page 2.
on the LCD screen and use the arrow to move to page 4.
.
in the bottom.
USER GUIDE
16