Fuse Replacement; Troubleshooting - ADJ REVO 4 IR User Manual

Revo 4 IR
First unplug the power. The fuse holder is located above the power cord input. Using a flat-head
screwdriver, unscrew the fuse holder, remove the bad fuse, and replace with a new one.
Revo 4 IR
Fixture Cleaning: Due to fog residue, smoke, and dust cleaning the internal and external optical
lenses and mirror should be carried out periodically to optimize light output. Cleaning frequency de-
pends on the environment in which the fixture operates (I.e. smoke, fog residue, dust, dew). In heavy
club use we recommend cleaning on a monthly basis. Periodic cleaning will ensure longevity, and
crisp output.
1. Use normal glass cleaner and a soft cloth to wipe down the out-side casing.
2. Use a brush to wipe down the cooling vents and fan grill.
3. Clean the external optics and mirror with glass cleaner and a soft cloth every 20 days.
4. Clean the internal optics with glass cleaner and a soft cloth every 30-60 days.
5. Always be sure to dry all parts completely before plugging the unit back in.
Revo 4 IR
Trouble Shooting: Listed below are a few common problems that you may encounter, with solu-
tions.
No light output from the unit;
1. Be sure the external fuse has not blown. The fuse is located on the rear panel of the unit.
2. Be sure the fuse holder is completely and properly seated.
Unit does not respond to sound;
1. Low frequencies (bass) should cause the unit to react to sound. Tapping on the microphone,
quiet or high pitched sounds may not activate the unit.
ADJ Products, LLC - www.adj.com - Revo 4 IR User Manual Page 15

Fuse Replacement

Cleaning
Trouble Shooting