Advanced Parameters - Emerson PACMotion VFD Series User Manual

Advanced Parameters

For Advanced Parameters, basic information only is provided in this guide. The parameter functions are
described more fully in Emerson PACMotion VFD Studio PC software.
Table 40: Parameter Group 6 – Advanced Configuration
Par . Function
P6-01 Firmware upgrade
P6-02 Thermal overload management
P6-03 Auto reset time delay
P6-04 Relay output hysteresis
P6-05 Encoder feedback
P6-06 Encoder PPR
P6-07 Speed error trip threshold
P6-08 Maximum pulse input frequency
P6-09 Speed droop
P6-10 Function Block program
P6-11 Speed hold time on enable
P6-12 Speed hold / DC inj. time on stop
P6-13 Hoist brake release time
P6-14 Hoist brake apply time
P6-15 Hoist brake pre-torque level
P6-16 Hoist brake pre-torque time limit
P6-17 Maximum torque limit time
P6-18 DC injection current
P6-19 Brake resistor resistance
P6-20 Brake resistor power
P6-21 Brake chopper under temp. duty
P6-22 Cooling fan run time reset
P6-23 Energy meters reset
P6-24 Maintenance time interval
P6-25 Reset maintenance indicator
P6-26 Analog output AO1 scaling
P6-27 Analog output AO1 offset
P6-28 P0-80 index select
P6-29 User default parameters
P6-30 Advance access code
GFK-3111A
Setting Range
0 Disabled
1 Update I/O & P/S
2 Update I/O
3 Update P/S
4 – 32 kHz (Model
Dependent)
1 – 60 Seconds
0.0 – 25.0%
0 Disabled
1 Enabled
0 - 65535
0.0 – 100.0%
0 – 20 kHz
0.0 – 25.0%
0 Disabled
1 Enabled
0 – 250 s
0 – 250 s
0.0 – 5.0 s
0.0 – 5.0 s
0.0 – 200.0%
0.0 – 25.0 s
0.0 – 25.0 s
0.0 – 100.0%
Model Dependent
Model Dependent
0.0 – 20.0%
0 No Reset
1 Reset
0 No Reset
1 Reset
0 – 60000 Hours
0 No Reset
1 Reset
0.0 – 500.0%
-500.0 – 500.0%
0 – 200
0 No Function
1 Save user parameters
2 Clear user parameters
0 – 9999
PACMotion VFD AC Variable Speed Drive User Guide
Default Notes
0 This parameter should
not be adjusted by the
user.
4 kHz Minimum Effective
Switching Frequency.
20 s
0.3%
0
0
5.0%
0 kHz
0.0%
0
0 s
0 s
0.2 s
0.3 s
8.0%
5.0 s
0.0 s
0.0% This function is
active only for
Induction Motors
(IM) and Synchronous
Reluctance Motor
(SyncRM).
2.0%
0
0
0 Hours
0
100.0%
0.0%
0
0
201
71