Emerson PACMotion VFD Series User Manual page 44

Setting a Parameter to the Minimum Value
TFT and OLED Display :
Maximum frequency/Speed limit
1500 rpm
P1-01 7500 rpm 0 rpm
Whilst editing a
parameter value, press
the Up and Down keys
simultaneously.
Adjusting Individual Digits
When editing parameter values and making large changes, e.g. setting the motor rated speed from
0 to 1500 RPM, it is possible to directly select the parameter digits using the following method.
TFT and OLED Display :
Extended menu access Extended menu access Extended menu access Extended menu access Extended menu access Extended menu access
0
P1-14 30 000 0 P1-14 30 000 0
Whilst editing a The cursor will
parameter value, step one digit
press the Stop to the left.
and Navigate keys Repeating the key
simultaneously. press will move
another digit to
the left.
44
Maximum frequency/Speed limit
0 rpm
P1-01 7500 rpm 0 rpm
The parameter will be set
to the lowest possible
value.
_0 _0
P1-14 30 000 0
The individual
digit value may
be adjusted using
the up and down
keys.
PACMotion VFD AC Variable Speed Drive User Guide
100
P1-14 30 000 0 P1-14 30 000 0
Adjust the value When the
using the Up and cursor reaches
Down keys. the highest
accessible digit,
pressing Stop
and Navigate will
return the cursor
to the right most
digit.
100 100
P1-14 30 000 0
Press the
Navigate key
to return to
the parameter
selection menu.
GFK-3111A