Emerson PACMotion VFD Series User Manual page 3

Declaration of Conformity
Emerson hereby states that the PACMotion VFD product range conforms to the relevant safety provisions of
the following council directives:
2014/30/EU (EMC) and 2014/35/EU (LVD)
Designed and manufacture is in accordance with the following harmonised European standards:
Table 1: Harmonized European Standards
EN 61800-5-1:
2007+A1:2017
EN 61800-3: 2004 /A1 2012
EN 55011: 2007
EN60529: 1992
Safe Torque Off ("STO") Function
PACMotion VFD incorporates a hardware STO (Safe Torque Off) Function, designed in accordance with the
standards listed below.
Table 2: "Safe Torque OFF" (STO) Function
Standard
EN 61800-5-2:2016
EN ISO 13849-1:2015
EN 61508 (Part 1 to 7):2010
EN60204-1:2006 + A1:2009 + AC: 2010 Uncontrolled Stop "Category 0"
EN 62061:2005/A2:2015
Electromagnetic Compatibility
All PACMotion VFDs are designed with high standards of EMC in mind. All versions suitable for operation on
Single Phase 230 volt and Three Phase 400 volt supplies and intended for use within the European Union are
fitted with an internal EMC filter. This EMC filter is designed to reduce the conducted emissions back into the
mains supply via the power cables for compliance with the above harmonised European standards.
It is the responsibility of the installer to ensure that the equipment or system into which the product is
incorporated complies with the EMC legislation of the country of use, and the relevant category. Within the
European Union, equipment into which this product is incorporated must comply with the EMC Directive
2014/30/EU. This User Guide provides guidance to ensure that the applicable standards may be achieved.
Copyright Emerson © 2020
All rights reserved. No part of this User Guide may be reproduced or transmitted in any form or by any means,
electrical or mechanical including photocopying, recording or by any information storage or retrieval system
without permission in writing from the publisher.
2 Year Warranty
All Emerson PACMotion VFD units carry a 2 year warranty against manufacturing defects from the date
of manufacture. The manufacturer accepts no liability for any damage caused during or resulting from
transport, receipt of delivery, installation or commissioning. The manufacturer also accepts no liability
for damage or consequences resulting from inappropriate, negligent or incorrect installation, incorrect
adjustment of the operating parameters of the drive, incorrect matching of the drive to the motor, incorrect
installation, unacceptable dust, moisture, corrosive substances, excessive vibration or ambient temperatures
outside of the design specification.
The local distributor may offer different terms and conditions at their discretion, and in all cases concerning
warranty, the local distributor should be contacted first.
GFK-3111A
Adjustable speed electrical power drive systems. Safety requirements. Electrical, thermal
and energy
Adjustable speed electrical power drive systems. EMC requirements and specific test
methods
Limits and Methods of measurement of radio disturbance characteristics of industrial,
scientific and medical (ISM) radio-frequency equipment (EMC)
Specifications for degrees of protection provided by enclosures
Classification
Type 2
PL "d"
SIL 2
SIL CL 2
PACMotion VFD AC Variable Speed Drive User Guide
Independent Approval
*TUV
3