Table of Contents
Advertisement
MultiRheo Filter - MRFD3
Pressure loss curve, housing
The upper housing curve holds for mineral oil with a density of 0.86 kg/dm³ and a
kinematics viscosity of 30 mm²/s. The lower housing curve holds for water at 20°C.
For turbulent flow, the differential pressure will change proportionally to the density;
for laminar flow, it will change proportionally to the density and viscosity. The flow
velocity should not exceed 3 m/s at the filter inlet for oil and 4 m/s for water.
HYDAC FILTER SYSTEMS GMBH
BeWa MRFD3 3217120b en-us 2012-03-07.doc
Flow rate in l/min
en(us)
Technical Description
Page 17 / 40
2012-03-07
Advertisement
Table of Contents
Need help?
Do you have a question about the MRF D3 and is the answer not in the manual?