Using The Machine For The First Time; Circuit Priming - Gaggia Milano NAVIGLIO MILK User Manual

ENGLISH
8
Naviglio milk en-nl-pl.indd 8

Using the Machine for the First Time

When using the machine for the first time, the following activities need to happen:
1 the circuit needs to be primed;
2 the machine will perform an automatic rinse cycle.
3 you need to perform a manual rinse cycle.

Circuit Priming

During this process, fresh water flows through the internal circuit to heat up the
machine. This takes a few minutes.
1 Place a container under the steam wand.
2 Press the " " button for 5 seconds to start the cycle. The machine starts the
automatic priming of the circuit by dispensing some water through the steam
wand.
3 When this process has been completed, the "
The machine is heating up.
" e " " buttons will flash.
01/08/2019 09:46:24