Beverage Brewing - Gaggia Milano NAVIGLIO MILK User Manual

Naviglio milk en-nl-pl.indd 11
2 Remove the "INTENZA+" water filter from its packaging.
Immerse it vertically in cold water (with the opening positioned upwards) and
gently press its sides so as to let the air bubbles out.
3 Set the filter according to the water hardness in your area. The settings can be
found on the filter packaging.
A = Soft water
B = Hard water (standard)
C = Very hard water
4 Insert the filter inside the empty water tank. Press it down until it cannot move
any further.
5 Fill the water tank with fresh water and insert it back into the machine.
Write down the date of the next water filter replacement (+ 2 months).
6 Dispense all the water in the tank by using the hot water function
(see the "Dispensing Hot Water" chapter).
7 Fill the water tank again.

Beverage brewing

Before brewing a beverage, check that both the water tank and the coffee bean
container are filled. Make sure that the dispensing spout is placed at the correct
distance from the cup edge.
ENGLISH
11
01/08/2019 09:46:28