ENGLISH
6
1
2
Naviglio milk en-nl-pl.indd 6
Preparing for Use
Machine packaging
The original packaging has been designed and manufactured to protect the
machine during transport. We recommend keeping the packaging material for
possible future transport.
Machine Installation
1
Remove the drip tray with grid from the packaging.
2
Remove the machine from the packaging.
3
For best use, we recommend to:
-
choose a safe and level surface, where there will be no danger of overturning
the machine or being injured;
-
choose a location that is sufficiently lit, clean and near an easily reachable
socket;
-
allow for a minimum distance from the machine sides as shown in the figure.
4
Insert the drip tray with grid into the machine. Make sure it is fully inserted.
Note: The drip tray collects the water that comes out of the dispensing spout
during each rinse cycle, as well as coffee that might be spilled during beverage
preparation. Empty and wash the drip tray daily and each time the full drip tray
indicator is raised.
Warning: NEVER remove the drip tray when the machine has just been turned on.
Wait a couple of minutes for the machine to carry out a rinse/self-cleaning cycle.
5
Remove the water tank.
6
Rinse the water tank with fresh water.
01/08/2019 09:46:21