Descaling - Gaggia Milano NAVIGLIO MILK User Manual

Naviglio milk en-nl-pl.indd 25
4 Apply a thin layer of lubricant to the guides, on both sides (see figure).
5 Reinsert the brew group (see the "Reinserting the Brew Group" chapter).
Note: you can use the lubricant tube multiple times.

Descaling

If the " " LED light remains on, the machine must be descaled.
The descaling cycle takes approx. 35 minutes.
Use only the Gaggia descaling solution designed to guarantee the machine's
excellent performance. The use of other products may damage the machine and
leave residues in the water. Failure to descale the machine will void the warranty.
Note: Do not remove the brew group during the descaling process.
Note: The descaling cycle may be paused by pressing the
resume the cycle, press the
tainer or to leave the machine unattended for a short time.
button again. This allows you to empty the con-
ENGLISH
25
button. To
01/08/2019 09:46:46